Back to insight logs
Ad Systems

How Much Do Facebook Ads Cost for Contractors?


What Facebook ads really cost a contractor, from cost per lead by trade to the minimum budget you need to test. Plus the number that actually matters, cost per booked job.

✔ HIGH-VALUE KEY PRINCIPLES IN BRIEF

  1. 1Cost per lead depends on your trade, offer, creative and market, so treat any benchmark as a rough range.
  2. 2Cost per booked job is the real number. Cheap leads that never answer are the most expensive leads you can buy.
  3. 3Ad spend and agency fees are two separate lines. Budget for both.

"How much do Facebook ads cost?" is the first question almost every contractor asks me. It is a fair question, and most answers online are useless.

You get "it depends" with no follow-up, or one national average that has nothing to do with your trade or your town.

So here is the honest version. I will give you rough cost-per-lead ranges by trade, explain what moves them up or down, and show you the number that matters more than cost per lead: cost per booked job.

The short answer

Facebook ads cost whatever you decide to spend. Meta lets you set a daily or monthly budget, and you can start, stop or change it anytime.

The real question is what you get for that money. For a contractor, that comes down to:

  • Cost per lead: what you pay for each form fill, call or message.
  • Lead-to-job rate: how many of those leads actually book.
  • Cost per booked job: what you paid in ads for each job you won.

Two contractors in the same town can spend the same amount and get very different results. One has a strong offer, real job photos and calls leads back in five minutes. The other runs a stock photo and calls back the next day.

The ad platform is the same. The cost per job is not even close.

Cost per lead ranges by trade

These are rough industry benchmark ranges, not our client data and not a promise. Cost per lead swings a lot with location, season, offer and how qualified you make the form. Treat this as a ballpark for planning, then let your own account tell you the real number.

Trade Typical cost per lead range (industry benchmarks) Why it lands there
Roofing $40 to $150 High-ticket, competitive, often storm-driven
Remodeling (kitchen, bath, basement) $50 to $200 Big, considered purchases with longer decision cycles
HVAC (replacement, not repair) $30 to $120 Seasonal spikes; repair calls mostly come from Google
Concrete (driveways, patios) $30 to $100 Visual, seasonal, strong before-and-after creative
Fencing $25 to $90 Clear price-driven offers work well
Landscaping and hardscaping $20 to $80 Visual, lots of homeowners browsing ideas

For a real number from a Meta account I managed directly: a 3D rendering firm got 402 qualified leads at about $20 each over nine months. That is a different business from a roofer, but it shows what a focused offer and solid follow-up can do to lead costs.

What drives your cost up or down

If your cost per lead is higher than you want, it is almost always one of these.

Your offer

The offer is the biggest lever you have. "Get a free estimate" is what every contractor in your town is already saying. Something specific, like a seasonal price, a financing option or a clear package, gives people a reason to stop scrolling. I wrote a whole post on why the offer is the ad.

Your creative

Real photos and video of your crew and your jobs usually beat stock images. People can tell when an ad looks like a template. Homemade phone video often wins because it looks like a real local business.

Your form

This one surprises people. Easier forms make cheaper leads, and often worse ones. An instant form with pre-filled contact info gets lots of submissions from people who barely remember filling it out.

Adding a qualifying question or two raises your cost per lead and usually lowers your cost per booked job. I break this down in the instant form trap.

Your targeting radius

Too small and Meta does not have enough people to show the ads to, so costs go up. Too big and you pay for leads in towns you do not want to drive to. Match it to the area you actually serve.

Season and competition

Costs rise when more advertisers compete for the same people: storm season for roofers, spring for landscapers and fence companies, and the holiday stretch when every retailer floods the feed. Your slow season can be cheaper to advertise in, which is why selling fences in February works.

Your tracking

If your pixel and Conversions API are not set up right, Meta cannot tell which leads were good, so it cannot find more people like them. Broken tracking quietly makes everything more expensive.

Cost per lead vs cost per booked job

Here is where most contractors get fooled.

Cost per lead is easy to see. It is right there in Ads Manager. Cost per booked job takes a little more work, but it is the number that pays your bills.

A simple example

These are made-up numbers to show the math, not real results.

Contractor A brags about $15 leads.

  • Spends $1,500, gets 100 leads
  • Only 3 of them book a job
  • Cost per booked job: $500

Contractor B pays $60 per lead.

  • Spends $1,500, gets 25 leads
  • 6 of them book a job
  • Cost per booked job: $250

Contractor B pays four times more per lead and gets twice as many jobs. This is why I wrote the $5 lead myth: the cheapest lead is often the most expensive one you can buy.

How to work out what you can afford

Turn it around. Start with your numbers, not a benchmark:

  1. Average job value. What is a typical job worth?
  2. Gross margin. How much of that is profit after materials and labor?
  3. Close rate. Out of 10 leads, how many usually book?

If a typical job makes you $3,000 in profit and you book one in every five leads, you can pay up to $600 per lead and break even on the first job. Anything under that is profit, before you count repeat work and referrals.

Most contractors find out they can afford much more per lead than they thought. They just need leads that actually book.

Speed changes everything

Your close rate is not fixed. It depends on how fast you follow up. A lead called back in five minutes is a completely different lead from one called back tomorrow. If you want your cost per job to drop, speed to lead is usually the cheapest fix.

How much budget you need to start

You can technically run Facebook ads on almost any budget. The problem with very small budgets is not that they do not work. It is that you cannot learn anything.

With only a handful of leads a month, you cannot tell if an ad is good or just had a lucky week. And Meta's delivery system needs a steady stream of results to optimize.

As a starting point, I usually suggest contractors plan for about $1,000 to $1,500 a month in ad spend for at least 30 to 60 days on one core service. That is enough to get a real read on cost per lead, lead quality and cost per booked job. High-ticket trades in expensive markets may need more.

A few rules for your first test:

  • One service, one area, one offer. Do not split a small budget across five campaigns.
  • Give it time. Editing the ads every two days resets the learning. I explain why in stuck in learning.
  • Track jobs, not just leads. Mark each lead as booked or not, even if it is just in a spreadsheet.

Ad spend vs agency fee

These are two separate costs, and you should always see them separately.

Ad spend goes straight to Meta. It is charged to your card, in your ad account. It buys the actual ads.

The agency fee pays for the person or team running the ads: strategy, creative, setup, tracking, weekly optimization and reporting.

Some things to watch for:

  • Make sure the ad account is in your name. You should own the account, the page and the pixel. If you ever leave an agency, you keep your history.
  • Ask what is included. Does the fee cover creative? Tracking setup? Reporting that shows booked jobs, not just leads?
  • Be careful with "all-in" packages that lump spend and fees together without showing the split. You should know exactly how much Meta is getting.

You can run ads yourself and skip the agency fee. Plenty of contractors do. Just count your time, and the cost of learning on your own budget.

If your cost per lead is too high, check these first

Before you blame Facebook, run through this list in order. It goes from the biggest, cheapest fixes to the smaller ones.

  1. Is the offer specific? "Free estimate" is not an offer. A clear price, package, financing option or seasonal deal is.
  2. Are you using real photos or video? Swap stock images for job photos or a 20-second phone video of your crew.
  3. Is tracking working? Check that the pixel fires on your thank-you page and that the Conversions API is sending lead events.
  4. Is the audience big enough? A tiny radius with strict targeting gives Meta nothing to work with. Broaden it to the full area you serve.
  5. Are you editing too often? Every big change restarts the learning phase. Let ads run at least a week before judging them.
  6. Is the creative tired? If the same ad has run for months, the same people have seen it many times. Fresh creative often brings costs back down.

If your cost per lead is fine but jobs are not booking, the problem is usually after the click: the form, the speed of the callback or the follow-up sequence.

What the best-run accounts have in common

Good Meta accounts for contractors share a few things, no matter the trade:

  • A specific offer, not "free estimate"
  • Real photos and video from real jobs
  • A form or landing page that filters out tire-kickers
  • Leads routed straight to a phone or CRM, with a callback in minutes
  • Tracking that shows which leads turned into jobs

When those are in place, Meta can work for businesses far outside home services too. A B2B equipment manufacturer I ran Meta for generated $285,000 in three months at a 28:1 return on ad spend, built on the same basics: strong offer, qualified forms, fast follow-up.

The bottom line

Facebook ads cost whatever you set your budget to. The real cost is what you pay for each booked job, and that is decided much more by your offer, creative, form and follow-up than by the ad platform.

If you want help working out what you can afford per lead and what a realistic test budget looks like for your trade, see how I run Meta ads for contractors, or book a 15-minute call. We will look at your job value, your market and your follow-up, and I will tell you straight whether ads make sense for you right now.

Frequently Asked Questions

What is a good cost per lead for contractors on Facebook?

It depends on your trade, offer and market. Instead of chasing a benchmark, work backward from your numbers. Take your average job value, your profit margin and how many leads it takes to book a job, and you get the most you can afford to pay per lead. Anything under that is working.

Can I run Facebook ads on $500 a month?

You can, but it is hard to learn much. A small budget produces only a handful of leads a month, which is not enough to tell a good ad from a lucky week. If $500 is the ceiling, use it on one service, one area and one strong offer.

Why are my Facebook leads cheap but bad?

Usually because the form is too easy. Instant forms with pre-filled info let people submit without really meaning it. Adding a qualifying question or two, or sending traffic to a landing page, raises the cost per lead but usually lowers the cost per booked job.

How long until Facebook ads produce results?

Leads can start in the first week. Judging whether the campaign is profitable takes longer, because you need enough leads to go through your sales process. Plan on at least 30 to 60 days before making big decisions.

Is the agency fee included in my ad spend?

Not usually. Ad spend goes straight to Meta on your card. The agency fee pays for strategy, creative, management and reporting. Ask any agency to quote the two separately so you know exactly what Meta is getting and what the agency is getting.


Want your CRM to run this mathematical sequence?

Schedule our 90-second system audit and book your free direct operational review session. No complex pitch. Just real coordinates.